產品名稱：新型高速自動提花鉤編織帶機K-400(8緯)
產品型號：K-400
產品描述：適于織造：彈性松緊帶、無彈性平帶、服裝帶、內衣內褲帶、背包帶、口罩帶、拉鏈帶；花邊帶、民族服裝帶、花式紗、繃帶、梯格帶等提花帶。織物闊幅從0.2cm～4.5cm皆可織造。
性能特點：
1、速度快、噪音低、易調整、外觀結實，既使生手也能在一天內掌握技巧，學會調整。
2、全部軸承均采用進口軸承，均置于封閉潤滑油內，使用壽命明顯延長。
3、易于上帶之拉帶輪裝置，易調整之彈性針板。
技術資料：
1、主機外型尺寸：長1700mm，寬700mm， 高1750mm.
2、操作寬度：800mm排針編號（每一英寸織針數）12-14-15- 18-20。
3、織物之寬度/出帶數：0.6公分/60條，1.5公分/28條，2公分/20條，4公分/10條 。
4、速度：1400轉/分
5、噪音：低于60分貝
標準附件：
1、經線及橡皮線用之鋁針排1組。
2、自動斷經控制裝置。
3、拉帶輪上設有預防卷帶裝置。
4 雙層自動送繆裝置及輔助送繆部件。
5、機臺側面收帶裝置。
6、筒子架（落紗架）可由100個紗位—500個紗位之裝置。
7、停止信號燈。
8、電腦自動調速系統。
產品名稱：新型高速自動提花鉤編織帶機
產品型號：K-400
產品描述：New-type high speeds the flat bring/brocade hooks weave bring suitable for weave Lace suchas：Elastic bring no elastic flat bring clothing bring， underwear bring， gauze mask bring， the zip bring: Lace bring， national clothings bring， ladder bring bandage. Wide of fabric is from 0.2cm～4.5cm can all be woven.
Performance characteristic：
1、The noise is low， easy to adjust， the appearance is durable， make the green hand able to grasp skill within one day too， be able to adjust.
2、All bearings are adopted imported bearing， put in sealing lubricating oil， the obvious extension in service life.
3、Bring on being easy draw and bring rounds of device， easy elastic needle boards that changes.
Technical data：
1、The outside size of the host computer：long 1400mm Wide700mm high 1750mm.
2、Operate width: Arrange needle number (every inches of knitting needles) 12-14-15-18-20。
3、Fabric width/area count：The 2ne centimeter/the 24th piece， The 4th centimeter/the 12th piece，the 6th centimeter/the 8th piece，The 8th centimeter/the 6th piece，The 10th centimeter/The 5th piece.
4、Speed：1400S/Cent
5、Noise：Lower than 80 decibels.
Standard enclosure：
1、Meridian and rubber thread arrange 1 group with its aluminium needle.
2、Automatic broken through controlling device.
3、Draw and bring wheel consist of prevent bring device.
4、Double layers automatic to give miao device and assist and give miao part.
5、Accept bring device to the side of platform of machine.
6、Tube shelf (fall yarn shelf) can be 100 piece of yarn location to 700 piece of yarn location.
7、Stop the signal lamp.
8、The broken device through shutting downautomatically.